48%SC Spinosad Insecticide 168316-95-8 Vegetable Garden
Insecticides
Description :
Spinosad is an insecticide, active by contact and ingestion; causes
paralysis.
It is based on chemical compounds found in the bacterial species
Saccharopolyspora
spinosa. It contains spinosyn A and spinosyn D.
The genus of Saccharopolyspora was discovered in 1985 by Lacey and
Goodfellow,
who described isolates from crushed sugar cane which produce
yellowish-pink aerial
hyphae, with bead-like chains of spores enclosed in a
characteristic hairy sheath.
This genus is defined as aerobic, gram-positive, non-acid-fast
actinomycetes with
fragmenting substrate mycelium. S. spinosa was isolated from soil
collected inside
a non-operational sugar mill rum still in the Virgin Islands.
Spinosad is a mixture of
chemical compounds in the spinosyn family that has a generalized
structure consisting
of a unique tetracyclic ring system attached to an amino sugar
(D-forosamine) and a
neutral sugar (tri-Ο-methyl-L-rhamnose). Spinosad is relatively
non-polar and not easily
dissolved in water.
Spinosad is a novel mode-of-action insecticide derived from a
family of natural products
obtained by fermentation of S. spinosa. Spinosyns occur in over 20
natural forms, and
over 200 synthetic forms (spinosoids) have been produced in the
lab. Spinosad contains
a mix of two spinosoids, spinosyn A, the major component, and
spinosyn D (the minor
component), in an approximately 17:3 ratio.
Quick Detail:
Product name: Spinosad 48%SC
Pesticide category: Insecticide
CAS NO.: [168316-95-8]; [131929-60-7] spinosyn A; [131929-63-0]
spinosyn D
MF: C41H65NO10 (spinosyn A); C42H67NO10 (spinosyn D)
Purity: 48%SC
Appearance (TC): Light gray or white powder
Appearance (48%SC): Off-white liquid
Brand name: Greenriver/ as per customers request.
Applications:
For control of pest Lepidoptera (e.g. Ostrinia nubilalis,
Helicoverpa zea, Trichoplusia ni,
Plutella xylostella, Spodoptera spp., Heliothis spp., Pieris rapae,
Keiferia lycopersicella,
Lobesia botrana), thrips (e.g. Frankliniella occidentalis, Thrips
palmi), flies (e.g. Liriomyza
spp., Ceratitis capitata), beetles (e.g. Leptinotarsa decemlineata)
and grasshoppers in
cotton, row crops, vegetables, and fruits, at 4.8-36 g/hl. Also
used for urban pest control
(e.g. Agrotis ipsilon, Spodoptera spp., Parapediasia teterella) in
turf and ornamentals, for
structural control of drywood termites (e.g. Cryptotermes brevis,
Incisitermes snyderi),
and for fire ant (Solenopsis spp.) control. Effective as a bait for
fruit flies (Ceratitis spp.,
Bactrocera spp., etc) and some ants (Solenopsis spp.).Under
development for use on
livestock animals for control of chewing and sucking lice (e.g.
Linognathus vituli, Bovicola
ovis, Solenopotes capillatus) and flies (e.g. Haematobia irritans,
Lucilia cuprina), and in
livestock premises for control of nuisance flies (e.g. Stomoxys
calcitrans, Musca domestica,
H. irritans). Formulation types SC; WG.
Specifications:
| Active Ingredient |
| Common Name | spinosad (BSI, pa ISO, ANSI) |
| Chemical Name | 2-[(6-deoxy-2,3,4-tri-O-methyl-a-L-mannopyranosyl)oxy]-13-[[5-(dimethylamino)tetrahydro-6-methyl-2H-pyran-2-yl]oxy]-9-ethyl-2,3,3a,5a,5b,6,9,10,11,12,13,14,16a,16b-tetradecahydro-14-methyl-1H-as-indaceno(3,2-d)oxacyclododecin-7,15-dione
(spinosyn A), mixture with
2-[(6-deoxy-2,3,4-tri-O-methyl-a-L-mannopyranosyl)oxy]-13-[[5-(dimethylamino)tetrahydro-6-methyl-2H-pyran-2-yl]oxy]-9-ethyl-2,3,3a,5a,5b,6,9,10,11,12,13,14,16a,16b-tetradecahydro-4,14-dimethyl-1H-as-indaceno(3,2-d)oxacyclododecin-7,15-dione
(spinosyn D) |
| Pesticide Category | Insecticide |
| CAS No | [168316-95-8]; [131929-60-7] spinosyn A; [131929-63-0] spinosyn D |
| Molecular Formula | C41H65NO10 (spinosyn A); C42H67NO10 (spinosyn D) |
| Properties | Form Light grey to white crystals (tech.). M.p. 84-99.5 °C (spinosyn A); 161.5-170 °C (spinosyn D) V.p. 3.0 ?10-5 mPa (25°C) (spinosyn A); 2.0 ?10-5 mPa (25°C)
(spinosyn D) S.g./density 0.512 (bulk, 20°C) Solubility Spinosyn A: In water 89 ppm (distilled water), 235 ppm
(pH 7) (both 20°C). In acetone 16.8, acetonitrile 13.4,
dichloromethane 52.5, hexane 0.448, methanol 19.0, n-octanol 0.926,
toluene 45.7 (all in g/l, 20 °C). Spinosyn D: In water 0.5 ppm
(distilled water), 0.33 ppm (pH 7) (both 20°C). In acetone 1.01,
acetonitrile 0.255, dichloromethane 44.8, hexane 0.743, methanol
0.252, n-octanol 0.127, toluene 15.2 (all in g/l, 20°C). Stability
Stable to hydrolysis at pH 5 and 7; DT50 (pH 9) 200 d (spinosyn A),
259 d (spinosyn D). Aquatic photodegradation DT50 (pH 7) 0.93 d
(spinosyn A), 0.82 d (spinosyn D). |
| Mode of Action | Active by contact and ingestion; causes paralysis. |
Toxicity
| Oral Acute oral LD50 for male rats 3783, female rats >5000
mg/kg. Skin and eye Acute percutaneous LD50 for rabbits >2000 mg/kg.
Non-irritating to skin; slight irritation to eyes (rabbits). Not a
skin sensitiser (guinea pigs). Inhalation LC50 (4 h) for rats >5.18 mg/l. |
| Formulation Specification |
| Product name: Spinosad 48%SC |
| Items | Standard | | Appearance | Off-white liquid | | Content of a.i. | ≥48% | | Suspensibility, % | ≥90 | | pH value | 6.0-10.0 | | Fineness (through 45um sieve), % | ≥98 | | Persistent foaming, mL | ≤25 |
|
Competitive Advantage:
| Our promise: |
| Our product features: | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging, | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment.
|
